Woodworking planter

Woodworking planter DEFAULT

Wood Planter Box Plans

This step by step diy project is about wood planter box plans. I have designed this patio planter box for you to build it in one weekend with basic tools. Invest in weather resistant materials. You only need basic tools and skills to build this love seat, but you will also save a significant amount of money. Take a look over the rest of my woodworking plans, if you want to get more building inspiration.

When buying the lumber, you should select the planks with great care, making sure they are straight and without any visible flaws (cracks, knots, twists, decay). Investing in cedar or other weather resistant lumber is a good idea, as it will pay off on the long run. Use a spirit level to plumb and align the components, before inserting the galvanized screws, otherwise the project won’t have a symmetrical look. If you have all the materials and tools required for the project, you could get the job done in about a day.



Projects made from these plans



Building a wood planter box




  • A – 6 pieces of 1×6 lumber – 48″ long, 6 pieces – 16″ long BOX
  • B – 8 pieces of 1×4 lumber – 24″ long LEGS
  • C – 3 pieces of 2×4 lumber – 46 1/2″ long, 1 piece of 2×6 lumber – 46 1/2″ long BOTTOM
  • D – 4 pieces of 1×4 lumber – 41″ long, 4 pieces – 12″ long, 2 pieces – 9 1/2″ long TRIMS
  • E – 2 pieces of 1×3 lumber – 51 1/2″ long, 2 pieces – 21″ long TOP TRIMS

 One day



Wood Planter Box Plans



The first step of the project is to build the  sides for the planter box. Use 1×6 lumber for the planter box and 1×4 lumber for the legs. Lay the slats on a level surface making sure there are no gaps between the components. Make sure the edges are flush and attach the legs. Drill pilot holes and insert at least two screws into each slat. Add waterproof glue for a stronger bond of the components.



Next, you need to attach the 1×6 slats to the ends of the planter box. Drill pocket holes at both ends and insert 1 1/4″ screws to secure them together tightly. Add glue to the joints and make sure the corners are right angled.

Attaching the bottom slats

Attaching the bottom slats

Fit the 2×4 and 2×6 slats to the bottom of the planter box. Leave no gaps between the components. In addition, I recommend you to drill pocket holes along the common edges and to insert 2 1/2″ screws, so you create a rigid surface. Alternatively, you can use waterproof glue and clamp them together before fitting the bottom to the frame.

Drill pilot holes through the frame of the planter box and insert 2 1/2″ screws into the bottom. Insert the screws every 8″ for a professional result.

Fitting the end legs

Fitting the end legs

Next, you need to attach the 1×4 legs to the ends of the planter. Align the edges flush and add glue to the joints. Next, insert 1 1/2″ brad nails to secure the legs into place tightly.

Fitting the end trims

Fitting the end trims

Continue the project by fitting the decorative trims to the ends of the wood planter box. Use glue and 1 1/2″ brad nails to secure the trims into place. These trims will enhance the look of the project and make it stand out.

Fitting the side trims

Fitting the side trims

Fit the 1×4 decorative trims to the front and back of the planter, as well. Use waterproof glue and 1 1/2″ brad nails to secure the trims to the planter box.



Next, you need to attach 1×3 trims to the top of the garden planter box. Cut both ends of the trims at 45 degrees using a good miter saw. Secure the trims to the frame of the box using 1 1/2″ brad nails and waterproof glue.

Planter Box with Legs Plans

Planter Box with Legs Plans

Last but not least, you need to take care of the finishing touches. Therefore, you have to drill drainage holes through the bottom of the planter box. In addition, you should consider stapling landscape fabric to the interior walls of the planter box, so you protect the components from decay.

Fill the holes and the dents with wood putty and let it harden for a few hours. Smooth the surface with 120-220 grit sandpaper and apply a few coats of stain or paint to enhance the look of the wood. Seal the finish with a few coats of spar varnish.

Wood Planter Box Plans

Wood Planter Box Plans

This planter box has a modern design and it is super easy to build, making it the perfect beginner friendly project. If you love flowers, you should consider building this planter for your deck or patio. If you build this, I would love to see your project.



This woodworking project was about wood planter box plans free. If you want to see more outdoor plans, check out the rest of our step by step projects and follow the instructions to obtain a professional result.

Sours: https://myoutdoorplans.com/planter/wood-planter-box-plans/

How to Build an Elevated Wooden Planter Box

Elevated Wooden Planter Box

This classic wooden planter is designed to hold upward of 400 lbs, which should be more than enough for wet soil and plants. Tailored to create a larger or smaller box, the real structure of this planter is provided by the base.

Tools and Materials Required

Saw (mitre, table, jig, circular or hand saw) — chisel — drill + bits — screwdriver — staple gun — clamps — (1) 4x4 x 8' cedar — (10) 1x6 x 8' cedar — (4) 2x4 x 8' cedar — 1-5/8" deck screws (1 box) — 3" deck screws (1 box) — landscape fabric — staples.

Cut List

Exact measurements of wood pieces may vary based on the size of your box. For this project, we used the following pieces of wood: (4) 1x6 x 6’ — (6) 1×6 x 22" — (6) 1x6 x 73-1/2” — (2) 2x2 x 22” — (4) 2x2 x 13”  — (2) 2x2 x 14-1/2" — (4) 4x4 x 23-3/4 — (2) 2x4 x 6’ — (4) 2x4 x 19-3/8”

Prep 2x2s

Cut one of the 2×4s into 2×2s. You can get two 8’ lengths plus a little sliver from the middle. Doing this first can save you a little time later. The 2×2 will be used as structure for the box.

Create the Box Bottom

For the bottom of the box, lay all the 1x6s on the ground. Look for splits, knots, warping, etc. Pick out the worst four, these are going to be the bottom of the box. Cut the four to 6-foot lengths. While you’re at it, cut two of the 2x4s to 6-foot lengths and set them aside. These will be used later to make the stand.

Measure the Width of the Bottom

Lay the four bottom boards next to each other and measure the width of them. Together they should be around 22”. This measurement will be end boards and the end brace.

Create Box Ends

Take the measurement from the previous step (in my case 22”) and cut that much from each of the remaining six boards. These will be the box ends. While you’re at it, cut two pieces of the 2×2 (from earlier step) at the same length.

Start the End Panels

You’ll need two of the end pieces and the two braces for this step to start the end panels. The braces will be attached 2-1/4” from the edge of the 1x6s (we’ll call this the bottom). Using clamps to hold them together, pre-drill two holes 6” from the end and attach with 1-5/8″ screws.

Make Corner Braces

Lay each of the assembled pieces on the flat side alone with two more of the end pieces. Measure the distance from the top of the brace to the end of the three boards. It should be in the 13-1/8 neighborhood. Cut four pieces of the 2×2 to this length, these will be the corner braces. Attach them along the edges of the 1x6s by pre-drilling and screwing the 1×6 to the bracing.

Finish the Ends and Join With the Bottom

Strengthen the joint between the bottom brace and the corner braces by drilling up through the bottom and driving a 3” screw into each corner. You now have the two box ends. Attach the four bottom boards to the ends by pre-drilling and 1-5/8” screws. I used clamps to hold the end panels to my bench for this part.

Create the Box Sides

Measure the outside length of the box. It should be around 73-1/2”. Those six remaining long pieces of 1×6? Cut those to this length. Attach the sides to the corner braces. See that overhang in the picture? DON’T do this. I actually left sides long and cut them flush after assembly. What ended up happening for me is I ended up with some sloppy ends.

Attach the Sides

Attach the sides to the bottom boards using 1-5/8” deck screws. My method: locate the center and pre-drill holes every 12” outward from center. Pop an extra screw in each of the corners to attach the sides to the ends.

Attach Side Braces

Set the assembled box on its bottom. On the inside of the box, measure from the bottom to the top. You should get a measurement of around 14-1/2. Cut 2 pieces of 2×2 to this length. Attach these vertically inside the box in the middle. Flip the box over and drive a 3” screw through the bottom into the side brace.

Cut Legs

Cut the 4×4 post into four 23-3/4″ lengths. Why? So you can get four legs out of a single 4×4.

Arrange Legs

Put the legs in a nice little stack like this, simulating their placement on the base. I like to rotate them so that the best sides are outwards. Mark a triangle on the bottom to indicate their position in the group. Note which faces will be the outside edges.

Make Notches

Mark the locations some notches. The notches will mate up with the 2×4s, so they will be the height and depth of a 2×4.

Cut the Outside Edges

Set your saw to the depth of a 2×4 and make a series of cuts on the outside edges (outside in relationship to the stack in the previous step).

Make a Series of Cuts

Make a series of cross cuts to get the party started. A table saw is more efficient than a circular saw. A band saw might be even better.

Chisel Away What is Left

Use a chisel to remove what is left. It doesn’t have to be absolutely perfect, so don’t sweat a little grove here or there. The point is that the weight of the box and soil will pass through the 2×4s into the leg at this point. It will also serve as the foundation for the structure.

Stage the Braces

Take the box and flip it upside down. Remember the 6-foot 2×4s? Place them in the bottom of the box. If they are a little too long, trim a little off. If they’re a tad short, don’t sweat it, not a biggie. What we’re doing here is measuring the space in-between the 2x4s. It should be in the neighborhood of 19-1/4”. Be sure to make the this measurement at the ends of the box as well as in the middle. I found that my middle was slightly narrower than the ends. Cut four pieces to fit a little loosely in between the 2×4s. Really the easiest way to do this is to put a 2×4 in place, mark it and cut it, custom fitting each to its position.

Add Additional Supports

Add the additional supports 2’ from each end and attach with 3” screws.

Attach the Legs

Lay the sides and end 2×4’s on out in a loose rectangle. Take a leg and turn it upside-down and clamp it into place in a corner of the 2×4’s (the notches you cut out should mate nicely to the 2×4’s).  Check for square. Pre-drill and screw into place using 3” screws. Do the same on the end pieces (clamp, drill, screw).

Add Landscape Fabric

Place the box on top of the stand. Drill 3/4 inch drain holes 12” from each end. Staple landscape fabric into the box and fill it with soil mix.

The Finished Product

It's time to start planting!

Sours: https://www.diynetwork.com/how-to/skills-and-know-how/carpentry-and-woodworking/how-to-build-an-elevated-wooden-planter-box-pictures
  1. Cross dj tutorial
  2. Cloud computing wgu
  3. Bully classes rewards
  4. 2018 high school quarterback rankings
  5. Minecraft mineshaft base

Patio Planter Box

A couple of tools and some basic woodworking skills are all it takes to build this durable planter.

This planter box will really show off the potted plants on your patio. It not only looks great, but it’s sturdy enough to last a long time. It may look like a lot of other planters you’ve seen, but it’s certainly not built like the rest. You’ll find you won’t need to do a lot of tedious hand work or use a lot of special tools to build this one. It’s designed to withstand the weather so you can use it outdoors. And since you can use construction lumber to build it, it’s also easy on your budget.


Premium Files

You can download the additional shop drawings that you purchased using the link in this box.

What You Get:

  • 9 printable (digital) pages of step-by-step instructions
  • 39 full-color photos and illustrations
  • Includes full plans for a longer planter box
  • Retail sources for materials and supplies

Note: After your purchase, you will receive an email containing a PDF attachment of your purchased plan, as well as instructions for logging in to download the plan and access any other associated files and videos, which will all be located on this page.



Similar Woodsmith Plans

Affiliate Link

Since you are an affiliate, you can use this url to link people to this page and get credited for it:

If you want to use an image thumbnail link, you can copy and paste something like this into the source code of your page:

Affiliate link unavailable.

Sours: https://www.woodsmithplans.com/plan/patio-planter-box/
DIY Modern Raised Planter Box // How To Build - Woodworking

Wood Magazine - Woodworking Project Paper Plan to Build Freestanding Planter Box

Add flowers anywhere in your yard with this easy-to-build planter box. Use it to create a border ? at the edge of a walkway or patio, for example. Place it in front of a window close to the sill or spaced farther away to make from for existing shrubbery. Will hold three 10in. diameter flowerpots.

Detailed project plan will show you how to build one of your own. Build multiples for a custom landscape design.

Overall dimensions of box: 16in. W x 44in. L x 13in. H


Shipping / Billing Information

This product ships direct from the manufacturer:

  • Your order will ship in approximately 5 business days.
  • This product is considered special order. Your account will be charged when you place your order.
  • Express or overnight shipping is not available for this product.
  • Paper plans and DVD's are shipped via US Postal Service within the US only.

Return Information

A full merchandise refund will be issued on any Wood Plans product returned within 30 days. Returns of Wood Plans manufacturer-shipped items beyond 30 days are subject to a 25% restocking fee. Please call our Customer Service Dept. at 1-800-535-4482 with any further questions.

If purchased at a Woodcraft Store, please return the item directly to the store where your purchase was made.

Warranty Information

Because this item is purchased and shipped directly from the manufacturer, their warranty supersedes any offered by Woodcraft.

Wood Plans Guarantee: 30-Day, No-Risk, Satisfaction Guarantee. No questions asked. If you're dissatisfied for any reason, just present your proof of purchase with the product for a full refund within 30 days of purchase.

Sours: https://www.woodcraft.com/products/woodworking-project-paper-plan-to-build-freestanding-planter-box

Planter woodworking

Introduction: DIY Modern Raised Planter Box // How to Build - Woodworking

I built these simple yet beautiful modern planter boxes using Cedar from the home center and a few pieces of angle iron. I do have detailed plans available for this project here, which include a materials list, cut list, and SketchUp file.

Step 1: Tools and Materials

Materials Used On The Planter Boxes (affiliate):

Tools Used On The Planter Boxes (affiliate):

Step 2: Material Prep

The first step in this project was to break down the Cedar boards into their final lengths. This build is made of Cedar 1x4s, 1x2s, and pressure treated Pine 2x6s. Cutting the boards to length could be done with a circular saw, but I used my miter saw with a stop block and it made things super fast.

After breaking down the Cedar boards, I could start assembling the panels which make up the sides of the planter boxes. The short panels are made up of four of the 1x4 pieces and two of the 1x2 pieces.

Step 3: Assembling Panels

First, I marked up 1 ½” from the bottom edge of the bottom board, which will indicate where I need to leave the gap for the 2x6s which will be added later. Next, I squared up all of the boards and laid out the 1x2 pieces. One of the pieces is just used to figure out the spacing, as these panels lock together by having this offset in the corners.

With the 1x2 spacer in place, I added glue where the other 1x2 would be attached, used some ⅛” spacers to set the distance between the boards, and then attached the 1x2 to the 1x4 behind it with some 1” brad nails.

As you can see, I’m using a t-square to make sure things are nice and square during this process, and this is extremely important. I just kept working my way up the panel, using the ⅛” spacers between each board, and then repeated the process on the other end of the panel.

After getting building each panel, I went back and reinforced them with some 1 ¼” screws. This really made the panels a lot sturdier and should help them to hold up much better in the elements.

Step 4: Long Panels

I was making two of these planter boxes, so next I repeated the process three more times to get my other short side panels, and then I could move on to making the long side panels.

These panels are built in the exact same way, first attaching the 1x2s with glue and brad nails, then reinforcing them with screws. The only difference with these longer panels in the extra upright support in the center of the panel, just to keep the boards from flexing under the weight of the soil and plants.

One thing I should also mention is that the 1x2 pieces should roughly line up with the top board. If it does, this will ensure that your panels are all the same size.

Step 5: Joining Panels Together

Once all of the panels were put together, I could start assembling them into the planter boxes. You can see here how the 1x2s contact each other in the corners, creating something along the lines of a lock rabbet joint in each corner. I also made sure to assemble the panels with the top edge resting on my workbench, to make sure the top edges all lined up.

To make sure the connection between the corners was tight, I clamped them together, making sure any gaps were removed, and then I could add some 2” screws through the short side panels into the 1x2 of the long panel. I only added one screw at each corner at this point, so that the panels could still pivot so I could still snug up the other end of the panels.

Next, I flipped the planter box over, clamped the top ends of the panels together, and then added more screws. The screws should be about 1 ⅛” in from the corner of the planter box, to make sure they connect with the 1x2 from the other panel.

Step 6: Adding the Bottom

With the outer walls of the planter box attached, I could go ahead and get to work on the bottom. The bottom is made up of 2x6 pieces, and first I measured to confirm the length of the pieces I needed.

Over at the miter saw station, I could go ahead and cut the boards to length, making sure to clean up that factory end on the first board.

The bottom pieces are attached to the panels with pocket screws, so I went ahead and drilled three pocket holes into the end of each board. Getting the settings worked out here were a little tricky, but I eventually landed on having the jig set to the 1 ⅜” setting and the depth stop collar on the bit set a little bit deeper than 1 ½”.

To install the bottom boards, I just lined up the bottom edge of the 2x6 with the bottom edge of the panel, clamped it in place, then drove in a few 1 ¼” pocket screws. On this first board, I used these pocket hole clamps, but they actually left dents in the Cedar, so I switched to parallel clamps for the rest of the boards.

With one board installed and my jig settings dialed in, I could drill pocket holes in the rest of the boards. This pressure treated lumber was so wet that it was clogging up the bit, but I got through it, it just made a mess.

Once all of the pocket holes were drilled, I could install the rest of the bottom boards. As you can see, there is a roughly 1 ¼” gap between each of the boards to allow for drainage. You don’t need to go nuts trying to get this measurement precise, since it doesn’t really matter. I just worked my way in from the ends, leaving a small gap and clamping the boards in place while I drove in the screws.

Step 7: Adding Trim

The last wooden pieces to add to the planter boxes were the trim around the top edges, but first I sanded all of the corners flush before doing that, to make sure the trim was seated well.

Next, I measured my actual final length, about 47 ½”, and then moved over to the miter saw to cut the angles. This is one area where using a circular saw would be really difficult, as you don’t have a lot of surface to rest the saw on, so I’d definitely recommend a miter saw here.

To cut the trim, I first cut a 45 degree miter on one end, then flipped the board around, marked my length, and cut an opposing 45 degree miter on the other end. I always leave these pieces long at first, and then trim them to final size based on the actual dimensions.

After getting one piece to the right length, I used it as a template for the second long piece of trim, which you see me doing here.

With both of the long pieces cut to size, I attached them to the planter box with glue and 1 ½” brad nails. The 1x2 uprights were a great spot to drive in nails here. I also made sure the edges of the 1x2s were flush with the outside of the panels.

Once the long trim pieces were installed, I measured the length for the short trim pieces and cut them in the same way over at the miter saw.

This is the fit you want, with the edge of the 1x2 flush with the panel. Also, it looks like there is a gap in the miter here, but the pieces are slightly different thicknesses. If you work with these kinds of Cedar boards, you’ll notice all kinds of inconsistencies like this, but luckily it’s nothing a little sanding can’t fix.

Step 8: Lining the Planter

Speaking of which, with all of the wooden pieces installed, I could go ahead and give the outside of the planter box a good sanding with 80 grit sandpaper. The key areas to focus on here are the corners, which you want perfectly flush, as well as the trim. I also made sure to round over the corners, as the angle iron I used for the legs has a rounded inside corner.

After sanding, it was time to make this box ready for some planting. First, I lined the bottom with some galvanized steel mesh, to keep dirt from falling out of the gaps in the bottom if the plastic breaks. I picked up these tips from a planter box video Ben over at Homemade Modern did, make sure to go check that video out as well as his design looked awesome, as always with Ben.

I used some aviation snips to cut the mesh to size, formed it to fit the bottom of the planter, and then stapled it into place with ½” staples. I did cut away the areas where the mesh came into contact with the 1x2 uprights, so that the mesh could lay flat.

I repeated this process on the other half of the planter off camera, making sure the mesh overlapped in the middle, and then I could add some plastic to line the planter. I used 2mil plastic drop cloth here, which wasn’t as thick as I wanted it to be, so I doubled it up to make sure the plastic didn’t break under the weight of all the soil, and then stapled it into place. After installing the plastic, I punched some holes through it with a screwdriver for drainage.

Step 9: Steel Legs

The last step in this build was the legs, which I made from steel 2” angle iron. Since I used steel here, I cut down the pieces on my metal chop saw, but you could also use aluminum angle and cut it on a regular miter saw. You could also get the angle iron from a steel yard and they would cut the pieces to size for you.

I set up a quick stop block to cut the pieces to length, as it’s super important that they all match perfectly.

After cutting the pieces to length, I rounded over all of the sharp edges using my belt grinder, but an angle grinder and flap disc would work great as well.

Step 10: Legs Continued

Next, I needed to drill the holes for the screws I used to attach the legs to the planter boxes. I wanted all of these holes to line up nicely, so I marked them all out on the inside faces of the angle iron. One tip here, I love these paint pens for marking on steel. They show up much better than Sharpie and the paint is removed easily with a little Acetone.

With all of the hole locations marked, I drilled the holes over at the drill press, making sure to use cutting fluid to keep my drill bit from getting too hot.

Once all of the holes were drilled, I wiped all of the pieces down with Acetone to remove the paint pen, cutting fluid, and any other surface contaminants, and then sprayed on a few coats of flat black enamel paint.

Step 11: Finishing Up

After letting the paint dry, I attached the legs to the corners of the planter boxes using construction adhesive and screws. I used 1 ¼” screws for the two upper holes but could use 2 ½” screws on the lower holes since the hole ran into those 2x6 bottom pieces.

One thing to look out for here is there might be a screw underneath some of the holes, depending on where you put the screws through the corners of the panels before. Also, I probably should have pre-drilled these holes, as I got a little splitting.

The last little detail on this build was to use the same flat black spray paint to touch up the screw heads and make them match the legs, then I could get the planter boxes filled. Luckily, my mom was in town when I built these planter boxes and she’s a master gardener, so we bought a bunch of plants and soil to fill up the boxes and got them looking really nice.

And with the plants added, these planter boxes were done!

Be the First to Share

Did you make this project? Share it with us!


  • Tinkercad Student Design Contest

    Tinkercad Student Design Contest
  • Pumpkins & Gourds Speed Challenge

    Pumpkins & Gourds Speed Challenge
  • Organization Contest

    Organization Contest
Sours: https://www.instructables.com/DIY-Modern-Raised-Planter-Box-How-to-Build-Woodwor/
Amazing Woodworking Project From Pallet Wood // How to build a planter bench - DIY

45 Amazing DIY Wooden Planter Box Ideas

These DIY wooden planter box ideas and easy to build and will spruce up your curb or backyard! Get lots of inspiration to build your own wooden planters!

Collage of DIY wood planter box ideas with text overlay


Container planters make gardening easy for any skill level or home!

Whether you are in an apartment or in a large house with acreage, DIY wooden planters are a great way to add curb appeal or grown your own veggies!

Making a wooden planter box is very easy! Most of them are a perfect afternoon project for any beginner woodworker.

Benefits of a DIY wooden planter box

  • Easy to build!
  • Make as big or small as you want for your space
  • Fewer weeds
  • You can move them where ever you want – for decor or for sunlight!

What wood to use for DIY planter box

Wooden planter boxes are very cost effective and easy to build.

  • Redwood – A great option because it is naturally rot-resistant and has been known to last for a long time. Unfortunately, it can be a lot more expensive than the other options. Learn more about redwood uses and advantages.
  • Cedar – Also rot-resistant, though not as long as redwood. pretty cost-effective too.
  • Douglas fir – Lasts a lot less – about 5-7 years. Cheapest wood used for garden boxes.
Collage of various DIY wooden planter boxes

When choosing the wood for your planter box, be sure to use untreated wood. The chemicals in treated wood can harm plants.


DIY Wooden Planter Box Ideas

Once you have decided what type of wood you want to build with, here are a few awesome DIY wooden planter box ideas to inspire you!

Almost all of these are super easy to make with the very basic tools!  Take a look!

1. DIY Tiered Raised Vegetable beds by Anika’s DIY Life

DIY Tiered raised vegetable bed with legs and trellis in backyard with vegetable plants

This is great for small yards where you don’t have a lot of ground space. The tiered planter not just gives you lots of space to grow those veggies, it also looks amazing!

2. DIY Lattice Planter Box by Anika’s DIY Life

Navy blue lattice planter box in patio with plants

This lattice planter box adds amazing character to your garden or yard. It is meant to be decorative and you can easily put your pot inside for the plants. Or you can attach landscape fabric to the inside and plant directly!

3. Tiered Cedar planter by Anika’s DIY Life

Easy DIY tiered planter box made from $10 in materials

This tiered wooden planter is super easy to build and takes only about an hour! All you need is a saw and nailer!

4. DIY Self-watering Planter by Anika’s DIY Life

Simple DIY self watering planter box in backyard

This planter might be simple to look at and build but it has a built-in self-irrigating system! See how it is made. Spoiler – it is very easy too!


5. $10 Cedar Tiered Flower Planter or Herb Garden by Ana White

These DIY wooden planter ideas will give you lots of inspiration!

Another gorgeous tiered planter to add vertical height!

RELATED: 20 Fun Ikea hacks to decorate with plants

6. Wood and Metal Planter Box Building Plans by Pneumatic Addict

This wood and metal DIY planter and many more ideas to spruce up your curb appeal

Add even more character with the addition of metal to a simple wooden planter box!

7. DIY Modern Outdoor Planter Box by The Handyman’s Daughter

yellow planter box with paneled sides

Don’t you just love the texture the panels add to the side of this planter?

8. DIY Planter Pot Table Combo by Bigger Than the Three of Use

This and many more DIY planter box ideas

Love this dual purpose planter and table! It is absolutely perfect for the patio!

9. DIY Outdoor End table with built-in planter by The Handyman’s Daughter

DIY Outdoor end table with colorful flowers

This end table is a genius idea! The planter serves dual purpose! Can you guess what you can switch it out for?

10. Pallet Planter Box for Cascading Flowers by Her Tool Belt

A cascading planter box made from Pallets!!

This is such a gorgeous planter box idea! You have to go take a look at what it looks like after a few months when it fills up with flowers!

11. Easy Rustic Planter Koozies by My Repurposed Life

These simple planter boxes and much more inspiration

These super easy planter ideas add the perfect rustic charm!


12. DIY Flower Boxes by The DIY Bungalow

This flower box and many more ideas for DIY Planter Boxes

A simple wooden window box is a easy to make and adds so much fun color to the home!

13. DIY Modern Cedar Planter by The DIY Huntress

This easy cedar planter and many more amazing DIY planter inspiration

If you need modern and clean lines, this is the perfect DIY planter box! It is super easy to build too!

14. Colorful Tin Can Planters and Pallet planters by Pillar Box Blue

recycled tin and pallet planter idea

If you are more into rustic beauty, this is a great way to add color and plants to your window!

15. Kitchen Herb Garden by Lovely Etc.

Find lots of inspiration to build a DIY planter here

If you are looking for a simple kitchen her garden, It is super easy to make!

16. “Jones” Tiered Raised Veggie Garden by Lazy Guy DIY

DIY wooden planter box ideas

Another great idea for tiered wooden planters!


17. Faux Zinc Planter by The Created Home

Faux zinc planter and many other wooden planter ideas

This is NOT metal! It is wood and its gorgeous! Take a look at how to make it look like zinc!

18. DIY Large Cedar Planters by Uncookie Cutter

15+ ideas for DIY Planter boxes

I love the tiered planters and their modern look! They make perfect planters for indoors or outdoors!

19. Easy 10-minute wooden planter by Uncookie Cutter

Easy 10 minute wooden planter idea

This little table top planter is made from scrap wood and takes about 10 minutes to make! I think it makes a great gift idea too!

20. Hanging Fence Garden by Thrift Diving

DIY hanging planter boxes on the fence

This is such a great use of the vertical fence space!

21. Reclaimed wood raised garden beds by 1915 House 

If you have been wanting to get into container gardening for veggies, this is the perfect starting point!

22. DIY Hanging Plant Stand by The Weathered Fox

Easy hanging plant stand

Not just a planter but also decor! Perfect idea for an entry way or back patio!

23. DIY Tapered Planter from Houseful of Handmade

tapered shaped wood planter box

Made from cedar fence pickets, this planter features a great tapered shape that is great for patios, decks, and porches.


24. DIY Large Planter Box from Love Create Celebrate

Tall wooden planter box stained dark brown

Modern planter boxes can be very expensive. Build your own and add a beautiful statement piece to your outdoor space.

25. Cedar Planter Boxes from Bitterroot DIY

wood planter box attached to deck rail

Cedar is known for being withstand the elements and when you add corner brackets they become the perfect wood planters for your deck railing.

26. Wood Planter Box with Trellis from The Handyman’s Daughter

Square wood planter box with wooden trellis

Fence pickets are easy to work with and you can use your leftovers to build this amazing wood planter box with a trellis for vining plants.

27. Raised Garden Bed with Shelf from Love & Renovations

raised wood planter box with storage shelf

Raised garden beds have become very popular and this one comes with a shelf underneath for storage.

28. End Table with Built-in Planter from The Handyman’s Daughter

flowers in a DIY wood planter built into an outdoor end table

Add sweet smelling flowers to your outdoor space with this end table that doubles as a wood planter box.

29. Raised Vegetable Garden with Compost Bins from Lazy Guy DIY

raised garden bed with t and arms to hold hanging flower pots

Create a wood planter box for your vegetable garden that includes a composting bin.

30. DIY Wood Planter Box from Crafted By The Hunts

Wood planter box on front porch with blue front doof

Bring some much need warmth to your front porch with this easy DIY wood planter box. Made with pine boards, just pop in a plastic pot and add your plants!


31. Simple Louvered Planter Box from Woodshop Diaries

2 DIY wood planter boxes in porch with mums in them

Using cedar for outdoor wood planter boxes is a great idea as it will stand up to the elements. These louvered planter boxes make a great addition to any outdoor space!

32. DIY Planter Box for Cheap from Lovely Etc.

DIY wood planter box with plants

I love the tapered sides of this planter box and the gray weathered finish makes it unique!

33. Cedar Fence Board Planter Box from Sustain My Craft Habit

wood planter box with evergreen limbs

This planter uses cedar fence boards and a 2×2 post to get the simple elegant look that is perfect for your outdoor spaces.

34. DIY Chair Planter from Charleston Crafted

pink wooden planter shaped like a chair

How fun is this pink wooden chair planter?! You could customize the words to say anything you want.

35. Outdoor Bench with Raised Planters from Lazy Guy DIY

outdoor bench with raised wooden planer boxes attached to the ends

Easily join two wooden planter boxes with a bench in between for a great place to relax after a long day!

36. Slatted Scrap Wood Planter from The Awesome Orange

two tall wood planters made from scrap wood one stained black one natural

These amazing slatted planter boxes were made from scrap wood. This easy beginner build is a great way to use up that pile of scrap wood!

37. Pallet Wood Planter from Unique Creations By Anita

4 tiered wood planter box with diamond accents

Pallet wood projects are still very trendy. This tiered planter with diamond accents is so cute and looks great anywhere!

38. Vertical Planter from Making Joy and Pretty Things

vertical wooden planter box system hanging on the outside of the house

Planter boxes don’t just have to sit on the ground. Take them vertical and hang it outside with shelves to add extra potted plants.

39. Space Saving Vertical Planters from Simple nature Decor Blog

DIY wood planters stacked together

When outdoor space is at a premium, stack your planters like these vertical stacking planter boxes. They are great for seasonal flowers or herbs and vegetables.


40. DIY Planter with Hose Storage from DIY Huntress

tapered wood planter boxes with garden hose storage in the bottom

Garden hose reels can be so ugly. Hide it away inside your planter with this great DIY wooden planter. You can stain them to get this color or use the shou sugi ban method so that they require no maintenance.

41. Simple Planter from Scrap Wood by Unique Creations By Anita

stacked planter made from scrap wood

Build this pretty Asian inspired planter from scrap wood.

42. Vertical Planter Box with Watering System from Houseful of Handmade

vertical six row planter with herbs planted in it

This cedar vertical planter box has multiple levels and has it’s own watering system taking water your plants off your to do list.

43. Vertical Garden Wall Planter from The Handyman’s Daughter

Slatted wooden wall with wood planter boxes attached

This free standing vertical planter box wall would be great to add privacy to your outdoor space.

44. Large Scrap Wood Planter Box from Toolbox Divas

large wood planter box with greenery next to outdoor space

Dress up your outdoor privacy wall with this large DIY planter. It’s easy to make and will use up that scrap woodpile!

45. DIY Railing Planters from The Handyman’s Daughter

wood planter box attached to deck railing

Simple planter boxes like these are an easy beginner build and will add a great look to your deck railing!


Aren’t all of these amazing? Are you inspired yet?

Which is your favorite one?

Filed Under: Featured, Outdoor, WoodworkingTagged With: outdoor, planters, round ups

Sours: https://www.anikasdiylife.com/diy-wooden-planter-box-ideas/

Similar news:

Planter Boxes

Planter Boxes Free Woodworking Plans and Projects building instructionsPlanter Boxes free woodworking plans and projects instructions. How to build outdoors planter boxes and indoors planter stands. Also, plans for planter boxes you can buy, planter stands and potting benches, along with other related gardening informat

Planter Boxes

Planter Boxes free woodworking plans and projects instructions. How to build outdoors planter boxes and indoors planter stands. Also, plans for planter boxes you can buy, planter stands and potting benches, along with other related gardening information.

Sponsored Ad

Redwood Planter Box
Planter Box, Bronze Mesh

Planter Box, Bronze Mesh

At first I really was not very excited about the way this project looked when I was finished. I was hoping for a more dramatic look from the bronze mesh. As it turns out it is pretty cool because as the light changes the planter changes appearance. The more direct sun that shines on it the more you see the mesh the more shade there is the less you see of it. It is sort of like one of those fancy paint jobs you see on a car that are always changing color.

Report Broken Link

Planter Box, Wooden

Planter Box, Wooden

This tasteful planter box is made of redwood; one of the best woods for resisting decay and insects. The boiled linseed oil finish enhances and brings out the natural beauty of the wood. This tasteful hanging planter is a great way to decorate and display flowers on your patio or deck.

Report Broken Link

Planter Box PDF
Planter Box

Planter Box

I combined 2 of my favorite tools with 2 of my favorite things. The jigsaw and nail gun plus flowers and fun colors!

Report Broken Link

Planter Box

Planter Box

This planter box woodworking project measures 33 inches wide x 24 inches deep. Plenty of room for lots of plants to thrive.

Report Broken Link

Square Planter Box

Square Planter Box

This is a link to a Google 3D SketchUp drawing for a planter box. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Report Broken Link

Planter Box, Long (PDF)
Raised Planter Box

Raised Planter Box

Tired of bending or kneeling to tend to your flowers?? Build a raised planter box. Perfect for bringing a little color to your front porch. Follow along at the link and build your own raised planter box.

Report Broken Link

Sponsored Ad

Louvered Planter Box

Louvered Planter Box

These fab louvered planter boxes were built using cedar but you could use any exterior grade lumber for this project. Cedar just happens to be beautiful. Follow along with the free plans and video to build your own.

Report Broken Link

Planter Box PDF

Planter Box PDF

If you plan to build a planter box, why not try a different look. Build this unique planter box using these free plans. At the link click on the -Download construction Plan- right under the heading.

Report Broken Link

Planter Box
Planter Box, Deck Rail

Planter Box, Deck Rail

This is a wonderful way to show your summer flowers around your deck. These planters are easy to build and can be made from scrap wood. Like many of our projects you easily make them to fit your situation. We made our planter to fit a long narrow plastic planter and go over a 2 X 6 ft deck rail.

Report Broken Link

Elevated Planter Box PDF
Planter Box
Planter Box

Planter Box

Build a planter box with these free woodworking plans. At the bottom of the link you will find a free download button as well.

Report Broken Link

Planter Box with Storage
Planter Boxes from Pallets
Planter Box PDF

Planter Box PDF

This planter box is for those who like to stand and garden. It has a great look to it and the free plan can be downloaded at the link.

Report Broken Link

Sponsored Ad

Planter Box

Planter Box

This is a link to a Google 3D SketchUp drawing for a planter box. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Report Broken Link

Tiered Planter Boxes
Square Planter Box

Square Planter Box

This is a link to a Google 3D SketchUp drawing for a square planter box. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Report Broken Link

Planter Box

Planter Box

Build your own planter boxes using this free tutorial. This one is three feet long but you could customize it to suite your needs.

Report Broken Link

Railing Planter Box

Railing Planter Box

These planter boxes are specifically designed to be attached to your railing or fence for added color. Follow the step-by-step building instructions to complete this project.

Report Broken Link

Planter Box
Planter Box

Planter Box

Here is a great DIY project for your yard. Just follow the instructions at the link and build your own planter boxes.

Report Broken Link

Planter Box

Planter Box

This is a link to a Google 3D SketchUp drawing for a planter box. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Report Broken Link

Planter Box

Planter Box

This is a link to a Google 3D SketchUp drawing for a two tier planter box. You will need the SketchUp software to download this drawing and its freely available online. We do not provide support for this software. Most drawings do not have instructions, its assumed you can build it based on the completed drawing provided.

Report Broken Link

Planter Box

Sponsored Ad

Sponsored Ad

Software: Kryptronic eCommerce, Copyright 1999-2021 Kryptronic, Inc. Exec Time: 0.173846 Seconds Memory Usage: 5.289207 Megabytes

Sours: https://woodworkersworkshop.com/

333 334 335 336 337